iPod mod, built by hand

Timeline: April 2026 →
iPod mod, built by hand

An old iPod with new insides, built by hand: a Raspberry Pi Zero 2 W, a PCM510x DAC with a headphone jack, a 2-inch colour display and a 1500 mAh battery, for an iPod 5th-gen metal case.

I set up Linux on the Pi and wrote the interface myself. I called it retroDAP: artists, albums, new releases, playlists, podcasts and search, all through the Spotify API. It also shows my WhatsApp messages. A script sends each new message to the Pi while it's connected to my phone's hotspot.

Pi Zero 2 W, DAC and display, showing a WhatsApp message (blurred here)

Pi Zero 2 W, DAC and display, showing a WhatsApp message (blurred here)

It worked, so the next step was a real board that fits the case: the iPod logic board.

Work log · 5 steps

  1. WhatsApp on the iPod April → · software

    A script forwards new WhatsApp messages to the Pi, which shows them on screen, page by page.

    Learned: It only works while the Pi is on my phone's hotspot. Both ends have to be on the same network.

  2. Linux, my own UI, Spotify April → · software

    Set up Linux, wrote the interface (retroDAP) myself, and connected Spotify through its API.

  3. Wired by hand April · build

    Raspberry Pi Zero 2 W, DAC, display and a 1500 mAh battery, soldered together.

    Learned: The 1500 mAh cell ran the whole thing without problems, so it went straight into the PCB design.

  4. The case Apr 12 · parts

    A thick silver metal back cover with a white hold switch, the 5th-gen part that later decided which iPod the PCB is for.

  5. Display and DAC Apr 10 · parts

    A 2-inch SPI colour display and a PCM510x DAC board with a headphone jack.